pH, ORP, and Titration, Combination Electrodes
Chemglass Life Sciences PH Electrodes for Chemglass Reactors, 12mm Shaft Diameter, 300mm Usable Shaft Length, 20mm Minimum Immersion Length, Glass Shaft Material, Fixed Cable Electrode Head, 0 to 100°C Temperature Range
Metrohm pH electrodes designed to be used with Chemglass reactors and data loggers. All electrodes are supplied with integrated PT 1000 sensor for temperature correction and have a BNC connector. 12mm Shaft Diameter, 300mm Usable Shaft Length, 20mm Minimum Immersion Length, Glass Shaft Material, Fixed Cable Electrode Head, 0 to 100°C Temperature Range.12mm OD probes designed to go directly into smaller reactors using the standard taper joint adapters (CG-1872-A-01 through CG-1872-A-03).
Cole-Parmer Hach 2028RO Differential ORP electrode, 10-ft cable, LCP body
GLI Differential ORP electrode, 10-ft cable, LCP body
Cole-Parmer Side-Mount Tuff-Tip pH Probe, DJ/PVDF/1kOhm RTD; Spade/BNC
The tip design protects the bulb from breakage and the gel internal fill solution allows electrode to be installed where others cannot. Rugged PVDF housing with 1/2'' NPT (M) threads withstands temperatures from 23 to 176°F (--5 to 80°C) and pressures to 100 psi. Use for measurements up to pH 13. Models include a 10-ft cable with BNC pH connector. Insertion depth 1''.
Cole-Parmer pH electrode, Refillable/SJ/Glass/Extra-Long/Thin/326x8mm; BNC
Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors.
Oakton by Cole-Parmer In-Line pH Probe, DJ/PVDF/100Ohm RTD/10'; Tinned/BNC
In-line electrodes operate from 32 to 212°F (0 to 100°C) and have a chemical-resistant PVDF housing with a 1/2'' NPT(M) thread. Housing measures 4'' x 15/16'' diameter. Electrode extends 1'' beyond housing. Maximum pressure 100 psi. Measure pH from 0 to 13.
Cole-Parmer Side-Mount Tuff-Tip pH Probe, DJ/PVDF/No ATC; BNC
The tip design protects the bulb from breakage and the gel internal fill solution allows electrode to be installed where others cannot. Rugged PVDF housing with 1/2'' NPT (M) threads withstands temperatures from 23 to 176°F (--5 to 80°C) and pressures to 100 psi. Use for measurements up to pH 13. Models include a 10-ft cable with BNC pH connector. Insertion depth 1''.
Cole-Parmer In-Line pH Electrode with Tuff-Tip, No ATC Element
An electrode with a semi-domed tuff-tip limits glass exposure and protects from damage. For your in-line process control needs, it is available in a single or double junction and BNC or tinned ends.
Cole-Parmer Oakton Basic conductivity/tds meter
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer pH Probe, DJ/Glass/1kOhm RTD/12 mm/10'; Spade/BNC
Use this probe for general purpose, double-junction electrodes to prevent contamination of the AgCl reference cell by solutions that might react with silver, such as heavy metals, organics and sulfides.
Cole-Parmer pH electrode, general purpose, combination, glass body, Delrin shield, BNC
Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors.
Cole-Parmer Tuff-Tip pH Electrode, No ATC, BNC, 3/4", graphite tip
Don't worry about bulb breakage, the unique Tuff-Tip design helps protect bulbs. Choose chemical-resistant Ryton PPS standard electrode or with graphite tip. Eliminate electrical noise with graphite-tipped models. Ideal for viscous or severe applications, these electrodes reduce contamination and clogging with uniform pore size.
Cole-Parmer Tuff-Tip pH Electrode, No ATC, BNC, 3/4"
Don't worry about bulb breakage, the unique Tuff-Tip design helps protect bulbs. Choose chemical-resistant Ryton PPS standard electrode or with graphite tip. Eliminate electrical noise with graphite-tipped models. Ideal for viscous or severe applications, these electrodes reduce contamination and clogging with uniform pore size.
Cole-Parmer pH Probe, DJ/Glass/100Ohm RTD/12mm/10'; Tinned/BNC
General purpose, double-junction electrodes prevent contamination of the AgCl reference cell by solutions that might react with silver (heavy metals, organics, sulfides). Electrodes can be used for measurements up to pH 13. Maximum pressure is 150 psi at 25°C.
Cole-Parmer pH Probe, Refillable, High-temp, pH with high Na+
Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors.